Water Damage Restoration Costs
No matter what the cause of water damage or flooding in your home, if you have to deal with this situation you’re going to want an idea of what your water damage restoration costs will be. As you already know, you’ll need to get the damage fixed as fast as possible. This will not only reduce your expenses but will also reduce the chances that contaminants, such as mold and mildew will accumulate and cause health problems.
Fast action will also be needed in order to keep your home from developing structural problems. Another consideration will be your appliances. If you don’t have water damage repaired, that could also cause items such as your washing machine to malfunction.
Here is a look at different types of water damage restoration costs so you can have a picture of what you’ll be paying.
Water Damage Repair Costs
On average, the average cost of water damage restoration is somewhere between $1,000 and $5,000. Of course, no two restorations are alike, so you might pay more or less.
If you just have some limited damage due to a toilet overflow, it could potentially cost as little as $150. But if your home has been flooded with water containing bacteria and other potentially dangerous contaminants, that could run as much as $20,000 or more.
Water Damage Repair Cost Per Square Foot
Water damage restoration cost per square foot will depend on a lot of things, such as not only the amount of damage that has occurred but also the location. You’ll also need to factor in considerations such as repairing or replacing appliances, flooring, walls, etc.
As you can see, that makes providing an exact figure of what you’ll have to pay almost impossible. But, in general, you’ll probably pay anywhere from $35 to $45 per square foot to clean up the damage and have any necessary repairs performed. If the job is more complicated, that will obviously be more expensive. There could, for instance, be an issue with your foundation, or you may have a roof leak.
Restoration Cost by Category of Water
One of the factors that will go into determining your water damage restoration costs will be the kind of water that has infiltrated your home. Basically, the dirtier the water, the more your restoration work will cost.
There are three categories of water in regard to restoration – Category 1, Category 2, and Category 3. Here’s a quick look at each, and how it will impact your restoration costs.
Category 1 – The average cost to repair category 1 (clean water) water damage is usually $3.75 per square foot.
Category 1 water is also referred to as “clean water.” It’s basically water that does not pose any sort of health risk. Most of the time, it will come from a source such as a leaking faucet, malfunctioning sprinklers, heavy rain or a burst pipe, or a failing water heater.
Category 2 – The average cost to repair category 2 (grey water) water damage is usually $3.75 per square foot.
Category 2 water is known as “grey water,” this is water that poses at least a minimal health risk. It could contain contaminants such as detergents or other chemicals that might cause problems if ingested. An example would be an overflowing washing machine or dishwasher.
Category 3 – The average cost to repair category 3 (black water) water damage is usually $7 per square foot since cleanup will typically require specialized equipment and experts in remediation,
This is the worst category by far, consisting of a type of water known as “black water.” It typically comes from dangerous sources like a sewage backup from a septic system or toilet, or a body of water such as the ocean, a lake, or a river.
Water Damage Floor Repair Cost
Depending on the type of flooring affected by water damage, repairs will usually range between $200-$550.
If you have carpeting or laminate flooring, it will absorb more liquid, and subflooring will degrade faster. This will result in higher repair costs. On the other hand, hardwood isn’t nearly as permeable. It can actually sit underwater for a few hours and not suffer hardly any damage. Tile can also be dried with minimal or no damage, but the affected area may need grout replacement.
Water Damaged Ceiling Repair Cost
The cost to repair water damage to a ceiling can vary widely, from as little as $350 to $1,250 or more. In most cases, it will cost you about $75 an hour to hire a professional to fix any sagging due to water damage. If, however, the problem is caused by a broken pipe, the cost could be as high as $2,000 or more.
Water Damage Wall Repair Cost
Damaged walls are one of the more common forms of water damage restoration projects, costing anywhere from $300-$2,000 on average. When water comes from the roof or ceiling, or a pipe leak or break occurs, there will likely be damage to several walls. But water on the floor can also necessitate a wall repair, especially if there is an inch or more of standing water.
Water Damage Drywall Repair Cost
Water from an extensive flooding event will usually seep into drywall, which typically needs to be replaced. This is necessary because when the backing of the drywall gets soaked, that provides a perfect environment for the growth of mold and mildew. While the average cost for drywall demolition and replacement is about $550, the cost will, in most instances, fall into the $300-$800 range.
Other Water Damage Repair Costs
If mold is present in other areas of your home, it will need to be removed quickly so it doesn’t spread and cause major health problems. Mold spores can start to grow exponentially in as little as 24 to 48 hours after moisture accumulates. The longer the water sits, the bigger the threat will be – and the more it will cost to remove the growth. This type of project will usually cost somewhere in the area of $2,200.
As you can see, water damage restoration costs can quickly add up. Your best chance of keeping those costs to a minimum will be to call a professional water restoration company as soon as you realize you have a water intrusion issue.